Dielectric Constant Dielectric Loss Tester Repair

Dielectric constant dielectric loss tester maintenance 1. Newly-purchased equipment inspection Newly-purchased equipment is best able to use the LKI-2 inductor group first, to measure the Q value of each inductor at each different frequency, the test case, the inductor number used, the test frequency Q reading, the capacitance reading, etc. Multiple records and test environment conditions are recorded one by one in detail, and records are saved for reference during subsequent maintenance.

The LKI-2 inductor group is designed for use as an auxiliary inductor for testing, and these inductors cannot be viewed as high-precision standard inductors. With different test environment conditions, the measured Q and distributed capacitance of the inductor may be slightly different.

2. The use and maintenance of high-frequency Q-meter is a relatively precise impedance measurement instrument. In the rational use and attention to maintenance, it can ensure long-term stability and high test accuracy.

a. Be familiar with this manual and use the instrument correctly;

b. Keep the instrument clean and dry.

c. The warranty period of this instrument is 18 months. If mechanical failure or loss of accuracy is found, it can be sent back to the factory and repaired free of charge.

Rubber Wheel

Pneumatic Rubber Wheel,Solid Rubber Wheel,Tubeless Wheel

Winners Corporation , http://www.wheelbarrow-china.com