1, Â Â Â Â Â Â Â Â Turner at work is strictly prohibited to wear gloves, machine work should wear protective glasses.
2, Â Â Â Â Â Â Â Â Wear labor protection products before work, and ask for neatness and neatness. Slippers, sandals and shorts are strictly prohibited.
3, Â Â Â Â Â Â Â Â Before driving, you should check whether there are other objects on the machine, and whether the protection devices such as lubrication and safety cover are good. Then test the car and work normally.
4, Â Â Â Â Â Â Â Â When the machine is in operation, it is not allowed to leave the post. If necessary, stop before leaving.
5, Â Â Â Â Â Â Â Â During the operation of the equipment, it is not allowed to reach into the workpiece and the tool. It is not allowed to transfer objects and measure objects without stopping.
6, Â Â Â Â Â Â Â Â The shift operation of the machine is prohibited, the cutting down of the scrap iron, do not blow mouth, application specific tool clearance.
7, Â Â Â Â Â Â Â Â Eat a knife can not be too fierce, the knife holder is not allowed to rub the various parts of the chuck. When using a trowel to burn light, the force should not be too large and the tool holder should be moved to a safe position. When using sandpaper, do not wrap the work.
8,         No tools, workpieces, etc. are placed on the turret and on the bed. When the workpiece is being corrected, the correcting disk should be placed in a safe place. When it is live, it should be powered off, and the handlebar should be hit to the “Neutral†position. Do not stand on the opposite cutting, wounding prevent iron.
9, Â Â Â Â Â Â Â Â Strictly in accordance with the requirements, strictly in accordance with the design requirements. Always scrub the machine, clean the workplace, and organize the tools.
filter,equipment,partition
ChangZhou FENGJU Machinery Equipment CO., LTD , https://www.nbfengjumachinery.com