At the fourth meeting of the Standing Committee of the 12th National People's Congress of Henan Province held on the 24th, the "Regulations on the Reduction of Pollution Emissions in Henan Province (Draft)" was again reviewed. Differentiate pollution control, install oil and gas recovery devices for oil depots, gas stations, and tank trucks... A number of new regulations are in place to combat pollutant emissions.
The "Regulations (Draft)" added that "oil depots, gas stations, and tank trucks should be constructed and installed in accordance with national regulations, and ensure the normal operation."
If the recycling device is not installed, or the normal operation is not guaranteed, the environmental protection department of the government at or above the county level shall order it to make corrections within a time limit, and impose a fine of 100,000 yuan and 200,000 yuan on the oil depot and gas station for the owner or operation of the tanker. The person is fined less than 10,000 yuan.
If this regulation is violated, the environmental protection department of the government at or above the county level shall order it to make corrections within a time limit; if it fails to change within the time limit, it shall be fined not less than 10,000 yuan but not more than 100,000 yuan.
HP Wear Plate is easily formable due to its mild steel base, and is easily welded without preheating. A cross-checked crack pattern on the wear surface relieves stresses and supports ductility-which is necessary when forming the plate to curved shapes. Due to its high percentage of chromium carbide, HP wear plate has a very low coefficient of friction and will polish to a mirror finish; thus, increasing lubricity and ultimately, material flow-this is especially important in prevention of buildup in coal chutes and of carryback on dozer faces.
HP Wear Resistant Group offers various products of wear plates namely Cr-Carbide Weld Clad Plates, Smooth Surface CCO plate, Heat Treated Wear Plates (AR Plate or Q&T Steel), Casting Plates, Tungsten Carbide Coated Plates in various grade and multiple size options.
The low carbon steel base plate enables the plate to be welded, bolted or studded to existing structures, while the hard facing provides the premier wear-resistant surface capable of working in all applicable service conditions at either ambient or elevated temperatures.
Due to its excellent properties, HP Wear Plates work for long-lasting service life and superb performance, which are well applied to the industries like Cement Plant, Steel Mill, Mining Site, Power Generation, Construction where need combat with abrasion.
Steel Plate,Wear Plate Liner,Ptaw Wear Resistant Liners,Welding Wear Resistant Alloy Steel, CCO Wear Plate, Smooth Surface Wear Plate, Tungsten Carbide Steel Plate
HuiFeng Wear Resistant Group , https://www.hpwearsolution.com