Domestic Pure Electric Bus Debuts at EVS-25 Today

Traditional cars cause urban traffic congestion and the environment is deteriorating. This has become the hot issue that the public is most concerned about. On November 5, the 25th World Conference on Pure Electric Vehicles, Hybrid Electric Vehicles and Fuel Cell Vehicles (hereinafter referred to as "EVS-25") will be held at the Shenzhen Convention and Exhibition Center. It is understood that this time there will be more than 300 auto and component manufacturers exhibiting in more than 20 countries including the United States, Japan, and France, and it will be the world's largest international electric vehicle conference.

In addition, the reporter learned that at 3:00 PM on November 4, pure electric buses will be patrolled in Shenzhen and will cover about 55 kilometers.

According to the organizers, three domestic pure electric buses are the highlights of this exhibition. The three buses will also be unveiled in Shenzhen for the first time.

According to reports, the operating cost of pure electric buses is about one eleventh that of conventional diesel passenger cars. After enjoying preferential policies, the price of cars is far lower than that of traditional passenger cars of the same class. Yesterday, the reporter saw at the exhibition site that the three pure electric buses participating in the exhibition were 12 meters of single-layer pure electric buses, 10.5 meters of double floors, and 13.7 meters of single-layer semi-finished products. The corresponding models were SDL6120EVG and new. The SDL6100EVG and SDL6140EVSG were developed. Because of their large size, 3 pure electric buses are particularly attractive to many cars. According to the person in charge of the manufacturer of the bus, this is the latest pure electric passenger car produced by the factory. The cost is generally 1.3 million yuan. As the state subsidizes 500,000 yuan and the local government subsidizes 300,000 yuan, it is considered a pure electric vehicle. The price of passenger cars is only 500,000 yuan, which is several hundred thousand yuan less than the price of traditional diesel passenger cars of the same grade.

In terms of passenger capacity, this pure electric bus can accommodate 86 passengers at the same time (typically the number of passenger cars is more than 50), and it can accommodate more than 100 passengers at peak hours.

In addition, a large number of batteries are installed on both sides of the bus body. As long as it is fully charged at night, it can be used for one-time travel of about 380 kilometers, and it is not necessary to recharge the vehicle halfway. The general city bus travels more than 200 kilometers a day.

“A bus running at a speed of about 20 km/h, with an average of 300 kilometers per day, is calculated on the average 100 kilometers of diesel fuel consumed in 42 liters. A bus costs 794 yuan per day, and operates on the same 300 kilometers. Under the condition of mileage, a pure electric passenger car can be charged at night, and charged once a day for 3 hours, charging 235 degrees, once electricity is 0.3 yuan, and only 70.5 yuan a day.The person in charge said that this is pure. The operating cost of electric buses is only about one eleventh that of conventional diesel passenger cars.

In addition, the pure electric bus itself does not emit harmful gases that pollute the atmosphere. According to eight years of normal operation of a passenger car, eight years of operation of a purely electric passenger car that replaces a traditional passenger car is rather free from cutting off 73 trees of 25 years old.

We started to export 10kV Transmission Line Steel Pole to Philippines from 2004 and supply more than 50,000 pcs each year.

Our firm introduced whole set of good-sized numerical control hydraulic folding equipment(1280/16000) as well as equipped with a series of good-sized professional equipments of armor plate-flatted machine, lengthways cut machine, numerical control cut machine, auto-closed up machine, auto-arc-weld machine, hydraulic redressing straight machine, etc. The firm produces all sorts of conical, pyramidal, cylindrical steel poles with production range of dia 50mm-2250mm, thickness 1mm-25mm, once taking shape 16000mm long, and large-scale steel components. The firm also is equipped with a multicolor-spayed pipelining. At the meantime, for better service to the clients, our firm founded a branch com. The Yixing Jinlei Lighting Installation Com, which offers clients a succession of service from design to manufacture and fixing.

Low Voltage Transmission Line

10kV Steel Pole, Low voltage Steel Power Pole, Steel Power Tubular Pole, Steel Tubular Post

Jiangsu Xinjinlei Steel Industry Co., Ltd. , http://www.steel-pole.com