Spray pressure dust car is mainly used to manage dusty weather conditions, such as time contains more dust in the air or blowing dust, dust car with pressure to reduce the amount of dust in the air. The spray duster is mainly used to pressurize and atomize the water, and then let these water droplets come into contact with the dust and sand in the air to achieve the effect of adsorbing dust, so that the dust content in the air can be effectively reduced. Spray dusters are mainly used for urban environmental cleansing work. They are used more frequently in spring and autumn. Let's take a look at the focus of repair work on spray dusters.
First, water pressure atomization equipment. Car spray pressure dust core equipment is the atomization pressure device on the water, by the water pressure and spray droplets can be achieved with the role of the government of dust, to be able to purify the city air. Atomization equipment is used at a high frequency, and it takes a long time to work under high pressure. These equipments are relatively prone to wear and should be checked carefully during inspections. On the one hand, it is necessary to pay attention to whether the parts of the equipment are worn or rusted. The other is to pay attention to the working status of the equipment. When checking, there are noises, and whether there are faults, such as the need to add lubricating oil, loose screws, etc.
Second, to hold water equipment. The container that holds the water source is equivalent to a supply place for the dust car. If there is a problem here, there is no source, and the effect of pressure dust cannot be achieved. The most critical problem in checking the water source is to prevent leaks and ensure that the water source can be safely contained in the tank. Also note that there is a place for wear and leakage of the connected pipe. Replace the new connection pipe if necessary. Otherwise, the efficiency will be reduced at the time of work, and the corrosion of other equipment parts will be caused.
Third, the spray platform lift system. The work of the lifting platform is controlled by the hydraulic system. It is necessary to add hydraulic oil to the equipment in time. Check the operating system regularly to see whether it can work normally and whether the operation platform can be flexibly and effectively controlled. The lifting and operating platform is a working platform for the spray duster . If there is a problem here, the duster can only be operated in a low place, which will not achieve the effect of high-altitude dustfall, resulting in a decline in the overall dustfall quality.
OSFE INDUSTRIAL CO.,LTD , https://www.1758cookware.com