- Model NO.: Fsh-A
- Trademark: ASCEND
- Specification: Ceramic
- HS Code: 8413502090
- Hardness: Mohs  Hardness  Rating  of  9
- Transport Package: Wood Cases
- Origin: Guangzhou, China
OEM Ceramic Pump Modules
Our OEM ceramic piston/cylinder modules are extremely hard and resist abrasion, resulting in a system that exhibits little to no wear even after hundreds of millions of cycles. In addition, the ceramics are compatible with most acids and bases. The natural crystalline structure of the ceramics displays zero porosity, which insures zero retention and carry-over of one biological fluid to the next.
Â
Characteristics
- High precision. 0.1% CV
- Smallest chamber size down to 20ul
- Sapphire, or Zirconia material
- Extreme hardness-next to diamond hardness
- Anti-friction, anti-corrosion.
- No contamination to fluid.
- Compatible to most fluids
- Wide selection of linear pump modules and rotary pump modules
- Excellent choice for dispensing applications for customers of biotech, pharmaceutical, medical device, general electronics, etc.
- Reagent dispensing and filling
- Glucose stripe dispensing
- Bio-sensor fluid dispensing
- LED chip glue dispensing
- Membrane striping
- Contact lens dispensing / filling
- Micro volume atomizing
- Cyanoacrylate and UV adhesives
[Trim Removal Tool]
This Automotive Trim Removal Tool is convenient for detaching parts of automobile interior, exterior parts, easily to remove dash, door components and update car speakers etc. This Automotive Tools can prevent your car from scratching and damaging. 4pcs panel removal tool was made by high quality polypropylene. It has good impact resistance and toughness to ensure that it will not break during use. Ergonomic design with lightweight, easy hand-held that effectively effort saving for various interior and exterior car trimming in the shortest time.
[Installation Tools]
This automotive installation tools are daily used great for professional wrapper and novice to install auto solar window tint, paint protection films,vehicle wraps,car decals.
Effectively scrape off the soap water and air bubbles. This remove&installation tools are suitable for all edges and corners, dry and wet surfaces. A complete installation tool kit with long handle and small squeegees provide you a smooth and wonderful wrapping experience.
[OBD Inspection Oil Service Reset Tool for BWM]
This OBD Inspection Oil Service Reset Tool is small and easy to carry.Easy to use, no batteries needed.Reset Inspection and Oil Service.
Use this tool to RESET the 'INSPECTION' & 'OIL SERVICE' reminders on your BMW (1982-2001)
Instructions:
Plug the device into the 20 pin diagnostic socket of your car;
Turn the ignition on, but do not start the engine;
Press the button for the operation you want to perform;
The LED of the chosen operation will turn on;
Keep the button pressed;
Reset is done when the LED turns off automatically;
Release button.
Remove Installation Reset Tools
Remove Installation Reset Tools,Clean Up Tool,Removal Tool,Uninstaller Tool
Shenzhen Cartrend Technology Co, Ltd , https://www.cartrendthings.com