Two Stage Compression Industry High Pressure Screw Air Compressor 

Posted on

Model NO.: TKL-75F-II
Product: Two Stage Compression Industr Air Compressor
Function: Air Compressor
Air Flow Capacity: 12.5-16.1m3/Min
Exhause Pressure: 0.8-1.3 MPa
Power: 45kw - 250kw
Control Method: Intelliegent Microcomputer Control System or PLC
Voltage: 380V-10000V/50Hz-60Hz
Oil Content: Under 3ppm
Noise: Under 68 Dba
Cooling Type: Wind Cooling Way
Trademark: GREAT
Transport Package: Export Standard Wooden Case, or as Customer Demand
Specification: 2470*1700*2020mm
Origin: China
HS Code: 8414809090
Model NO.: TKL-75F-II
Product: Two Stage Compression Industr Air Compressor
Function: Air Compressor
Air Flow Capacity: 12.5-16.1m3/Min
Exhause Pressure: 0.8-1.3 MPa
Power: 45kw - 250kw
Control Method: Intelliegent Microcomputer Control System or PLC
Voltage: 380V-10000V/50Hz-60Hz
Oil Content: Under 3ppm
Noise: Under 68 Dba
Cooling Type: Wind Cooling Way
Trademark: GREAT
Transport Package: Export Standard Wooden Case, or as Customer Demand
Specification: 2470*1700*2020mm
Origin: China
HS Code: 8414809090
Two Stage Compression Industry High Pressure Screw Air Compressor 

Two Stage Compression Industry High Pressure Screw Air Compressor 
Two Stage Compression Industry High Pressure Screw Air Compressor 

Two stage compression energy saving advantages:
1.The intaked air flow after compressed by the first stage compression, connect with large amount oil mist then cool fast, and then goes into the second stage compression system to be compressed and discharged, more energy saving than one stage compression type.
2. Adopt internal spray oil cooling type, enable air isothermal compression, saving energy by 8%.
3. Each stage compression ratio is as low as 3:1, little internal leakage, improving efficiency by15%.
4. Adopt German rotor screw air end, big rotor and low rotary speed designing, Working reliable, low noise, long use life.
5. Have fixed frequency type (TKL) and permanent magnetic motor with frequency conversion one-piece shaft type (TKLYC).
 
Advantages of the whole unit air compressor:
1. Approved by ISO9001certificate, SGS, CE and etc..
2. Adopt special design electric motor, and SKF heavy bearing, IP54, high efficiency, reliable and long use life.
3. Adopt world famous brand of air intake filter, oil filter, air and oil separator, realize high filtration accuracy, compressed air oil content under 3ppm, reach to international advanced standard level.
4. Equip with the most advanced air control system. Adopt air intake valve, intelligent control system and pressure sensor combined control method, can operate by ON and OFF two point, stepless air capacity control system, time-delay stop and automatically start device three air capacity control method, can meet different clients demand.
5. Intelligent microcomputer control system, Chinese and English language operation interface, malfunction display, alarm and machine stop automatically.
6. Adopt high quality and world famous brand of main components like UK APD filter, America AMOT temperature controlling valve, SCHNEIDER electric parts and etc., high efficiency, reliable and long use life.

Technical parameter of two stage air compressor:
(TKL type):
Model  Exhause pressure (Mpa) Air displacemen  (m3/min) Power (Kw) Noise (dBa) Dimensions (mm) Outlet pipe size Weight (Kg)
TKL-45F-II 0.8 9.5 45 68 1800*1500*1510 DN50 2400
1.0 8.8
1.3 8.1
TKL-55F-II 0.8 11.5 55 68 1800*1500*1510 DN50 2430
1.0 10.9
1.3 10.5
TKL-75F-II 0.8 16.1 75 68 2470*1700*2020 DN65 2700
1.0 14.5
1.3 12.5
TKL-90F-II 0.8 19.8 90 68 2470*1700*2020 DN65 2800
1.0 16.5
1.3 13.5
TKL-110F-II 0.8 24.0 110 68 2660*1700*2020 DN65 2850
1.0 19.8
1.3 17.2
TKL-132F-II 0.8 28.3 132 70 2660*1700*2020 DN65 4150
1.0 23.2
1.3 19.2
TKL-160F-II 0.8 33.3 160 72 3460*2040*2200 DN80 5100
1.0 28.4
1.3 23.6
TKL-185F-II 0.8 38.5 185 72 3460*2040*2200 DN80 5200
1.0 33.3
1.3 28.4
TKL-200F-II 0.8 41.3 200 75 3460*2040*2200 DN80 5250
1.0 38.5
1.3 33.5
TKL-220F-II 0.8 45.5 220 75 3720*2220*2200 DN100 6100
1.0 40.8
1.3 37.6
TKL-250F-II 0.8 54.7 250 75 3720*2220*2200 DN100 6200
1.0 44.9
1.3 40.3

(TKLYC permanent magnetic frequency conversion type):
Type Exhause pressure (Mpa) Air displacemen (m3/min) Power (Kw) Noise (dBa) Dimensions (mm) Outlet pipe size Weight (Kg)
TKLYC-15F-II 0.8/1.0/1.3 2.7/2.3/2.2 15 66 1600*900*1300 G1 1/2 800
TKLYC-18F-II 0.8/1.0/1.3 3.5/3.0/2.5 18.5 66 1600*900*1300 G1 1/2 840
TKLYC-22F-II 0.8/1.0/1.3 4.0/3.5/3.0 22 66 1600*900*1300 G1 1/2 860
TKLYC-30F-II 0.8/1.0/1.3 6.4/5.0/4.2 30 68 1800*1500*1510 G1 1/2 1100
TKLYC-37F-II 0.8/1.0/1.3 7.0/6.0/5.5 37 68 1800*1500*1510 G1 1/2 1100
TKLYC-45F-II 0.8/1.0/1.3 9.5/8.8/8.1 45 68 1800*1500*1510 DN50 2200
TKLYC-55F-II 0.8/1.0/1.3 11.5/10.9/10.5 55 68 2300*1400*1800 DN50 2600
TKLYC-75F-II 0.8/1.0/1.3 16.1/14.5/12.5 75 68 2300*1400*1800 DN65 2850
TKLYC-90F-II 0.8/1.0/1.3 19.8/16.5/13.5 90 68 2470*1700*2020 DN65 2950
TKLYC-110F-II 0.8/1.0/1.3 24.0/19.8/17.2 110 68 3100*1740*2150 DN80 3000
TKLYC-132F-II 0.8/1.0/1.3 28.3/23.2/19.2 132 70 3100*1740*2150 DN80 3100
TKLYC-160F-II 0.8/1.0/1.3 33.3/28.4/23.6 160 72 3460*2040*2200 DN80 5400
TKLYC-185F-II 0.8/1.0/1.3 38.5/33.3/28.4 185 72 3460*2040*2200 DN80 5600
TKLYC-200F-II 0.8/1.0/1.3 41.3/38.5/33.5 200 75 3460*2040*2200 DN80 5800
TKLYC-220F-II 0.8/1.0/1.3 45.5/40.8/37.6 220 75 3720*2220*2200 DN100 6100
TKLYC-250F-II 0.8/1.0/1.3 54.7/44.9/40.3 250 75 3720*2220*2200 DN100 6200
 

Our factory and workshop:

Two Stage Compression Industry High Pressure Screw Air Compressor 

After sales service:
1. Providing professional air compression program designing for free.
2. Providing our factory original machine parts at lowest price after machine sales.
3. Providing training and guidance for free, customers can send their staff to our factory to learn how to operate the machines.
4. Warranty period: the screw main machine is one year, the bearing is one year, the wear parts of air intake valve, electric components, electromagnetic valve, rate valve are 6 months
5. The air filter, oil filter, oil-water separator, lubricating oil, rubber parts and etc. are not included in warranty range.

Certification and patents of our air compressor

Two Stage Compression Industry High Pressure Screw Air Compressor 

 
FAQ:
Q1: Are you factory or trade company?  
A1: We are factory.
Q2: Warranty terms of your machine? 
A2: One year warranty for the machine and technical support according to your needs.
Q3: Will you provide some spare parts of the machines? 
A3: Yes, of course.
Q4: How long will you take to arrange production? 
A4: 380V 50HZ we can delivery the goods within 20 days. Other electricity or other color we will delivery within 30 days.
Q5: Can you accept OEM orders? 
A5: Yes, with professional design team, OEM orders are highly welcome!
Two Stage Compression Industry High Pressure Screw Air Compressor 

Two Stage Compression Industry High Pressure Screw Air Compressor 
Two Stage Compression Industry High Pressure Screw Air Compressor 

Two stage compression energy saving advantages:
1.The intaked air flow after compressed by the first stage compression, connect with large amount oil mist then cool fast, and then goes into the second stage compression system to be compressed and discharged, more energy saving than one stage compression type.
2. Adopt internal spray oil cooling type, enable air isothermal compression, saving energy by 8%.
3. Each stage compression ratio is as low as 3:1, little internal leakage, improving efficiency by15%.
4. Adopt German rotor screw air end, big rotor and low rotary speed designing, Working reliable, low noise, long use life.
5. Have fixed frequency type (TKL) and permanent magnetic motor with frequency conversion one-piece shaft type (TKLYC).
 
Advantages of the whole unit air compressor:
1. Approved by ISO9001certificate, SGS, CE and etc..
2. Adopt special design electric motor, and SKF heavy bearing, IP54, high efficiency, reliable and long use life.
3. Adopt world famous brand of air intake filter, oil filter, air and oil separator, realize high filtration accuracy, compressed air oil content under 3ppm, reach to international advanced standard level.
4. Equip with the most advanced air control system. Adopt air intake valve, intelligent control system and pressure sensor combined control method, can operate by ON and OFF two point, stepless air capacity control system, time-delay stop and automatically start device three air capacity control method, can meet different clients demand.
5. Intelligent microcomputer control system, Chinese and English language operation interface, malfunction display, alarm and machine stop automatically.
6. Adopt high quality and world famous brand of main components like UK APD filter, America AMOT temperature controlling valve, SCHNEIDER electric parts and etc., high efficiency, reliable and long use life.

Technical parameter of two stage air compressor:
(TKL type):
Model 

NS series efficient round Vibrating Screen

Technical parameters

model

screen size(mm)

storey number

aperture size(mm)

amplitude

(mm)

output capacity(t/h)

Power(kw)

NS7-16

2140×4880

1

2.5-200

9.5

126~630

15

2

2.5-200

9.5

15

NS7-20

2140×6100

1

2.5-200

9.5

155~800

22

2

2.5-200

9.5

22

NS8-20

2440×6100

1

2.5-200

9.5

185~950

22

2

2.5-200

9.5

22

3

2.5-200

9.5

2×15

NS9-20

2750×6100

1

2.5-200

9.5

200~1040

30

2

2.5-200

9.5

30

NS10-20

3050×6100

1

2.5-200

9.5

255~1160

2×22

2

2.5-200

9.5

2×22

3

2.5-200

9.5

2×30

NS10-24

3050×7320

1

2.5-200

9.5

260~1300

2×22

2

2.5-200

9.5

2×22

NS12-24

3660×7320

2

2.5-200

9.5

324~1620

2×37

Product introduction

This series of vibrating screen is an efficient vibrating screen for introducing advanced foreign technology.

performance

It uses advanced engineering mechanical design to ensure sufficient strength,Using advanced computing technology to ensure fixed  resonance. High vibration intensity, large amplitude, high yield and high efficiency. It is lubricated with thin oil, fully lubricated and avoid to be heated.

 

 

linear screen

Technical parameters

model

storey number

aperture size(mm)

double-amplitude(mm)

vibrational frequency(r/min)

max feed particle size(mm)

output capacity(t/h)

Power(kw)

ZKR1230

1

0.25-50

6-9

970

250

7.2~144

2×4

ZKR1245

1

0.25-50

6-9

970

250

10~200

2×5.5

ZKR1260

1

0.25-50

6-9

970

250

14~288

2×11

ZKR1437

1

0.25-50

6-9

970

250

10.5~210

2×5.5

ZKR1836

1

0.25-50

6-9

970

250

13~250

2×7.5

ZKR1845

1/2

0.25-50

6-9

970

250

16.4~324

2×11/15

ZKR1860

2

0.25-50

6-9

970

250

22~432

2×15

ZKR2160

2

0.25-50

6-9

970

250

25~500

2×30

brief introduction:
 Linear screen is mainly used for screening and grading materials, and is widely used in metallurgy, chemical industry, coal, building materials and other industries.

 

Eccentric block type circular vibrating screen

Technical parameters

model

storey number

aperture size(mm)

double-amplitude

vibrational frequency

max feed particle size(mm)

output capacity

(t/h)

Power

(kw)

YK1545

1/2/3/4

6-100

6-8

970

200

80-450

11/15/22/30

YK1836

3

6-100

6-8

970

200

81-405

22

YK1845

2

6-100

6-8

800

200

97-486

30

YK1854

1/2/3/4

6-100

6-8

800

200

113-600

22/30/30/45

YK1860

1/2/3

6-100

6-8

800

200

120-650

22/30/37

YK2052

2/3/4

6-100

6-8

800

200

126-630

30/37/45

YK2160

2/3/4

6-100

6-8

800

200

144-755

37/45/45

YK2460

1/2/3

6-100

6-8

800

200

172-880

37/45

YK3060

2

6-100

6-8

800

200

216-1080

45

brief introduction

Eccentric block circular vibrating screen is used for screening and classifying materials and widely used in metallurgy, chemical industry, coal, building materials and other industries

Self-fixed center vibrating screen

Technical parameters :

model

storey number

aperture size(mm)

double-amplitude(mm)

vibrational frequency(r/min)

max feed particle size(mm)

output capacity

(t/h)

Power

(kw)

SZZ9018

1/2

10-50

6-8

1017.5

80/40

50

2.2/2.2

SZZ1225

1/2/3

6-100

6-8

850

200

≤150

5.5/5.5/7.5

ZD1230

1

6-100

6-8

850

200

70-180

7.5

ZD1236

2/3

6-100

6-8

850

200

85-255

7.5/11

ZD1240

2/3

6-100

6-8

850

200

95-280

7.5/11

ZD1530

1/2/3

6-100

6-8

850

200

90-270

5.5/7.5/15

YA1536

1/2/3

6-100

6-8

850

200

95-310

7.5/11/15

YA1236

3

6-100

6-8

850

200

85-255

11

brief introduction:

The self-determined center vibrating screen is widely used in metallurgy, chemical industry, coal, building materials and other industries

 



Company IntroductionQM


Luoyang Hong Xin Heavy Co., LTD. is located in Luoyang Xin'an Industrial Park, Luoyang Hongxin Heavy Machinery Co., Ltd is an enterprise featured with industrial designing, processing and manufacturing, which is qualified for import-export trade. Covering an area of 15,000 square meters and holding an annual production value of 80 million RMB, the company of 20 million RMB registered capital has total 100 staff members, among which there are 20 engineering technicians owning senior and medium professional titles and 40 intermediate and senior technicians capable of product designing and developing.

Hongxin is dedicated to produce reducers, hoists, crushers, Ball Grinding Mills and the equipments of screening, coal washing, metallurgy and cement, and replacement parts. Meanwhile, we provide the perform maintenance service for various series of equipments. There are 52 large-scale equipments applied into the manufacturing process, such as T200 CNC floor boring and milling machine, YK 73125 CNC molding gear grinding machine, YK322B CNC molding gear grinding machine, Y3200 gear hobbing machine, Y1600 CNC gear sharper, 4m vertical lathe, 6.3m CNC vertical lathe, T110 CNC boring machine, and 52 middle-sized productive and assistive equipments, which integrate strong manufacturing and processing capability with complete managing system of production and technology, quality management system and comprehensive testing measures.


Certificates

zz



Contacts

DoraPhoebeKrisVickyying


Vibrating Screen

Vibrating Screen,Rotary Vibrating Screen,Ultrasonic Vibrating Screen,Vibrating Screen Machinery

Luoyang Hongxin Heavy Machinery CO., TLD. , http://www.hxreducer.com