The CDLF series is a non-self-priming vertical multistage centrifugal pump designed for efficient and reliable operation. The motor is directly connected to the pump via a shaft coupling, ensuring smooth power transmission. The impeller and guide vanes are manufactured from stamped stainless steel plates or precision-cast stainless steel, offering a smooth surface that minimizes hydraulic losses and makes cleaning easier. This design is particularly suitable for handling clean and pure media. The pump features a straight-line inlet and outlet, and can be equipped with either IEC or NEMA motors, providing flexibility in installation.
Operating Conditions
This pump is ideal for use with thin, clean, non-flammable, and non-explosive liquids that contain no solids or fibers. It operates within a temperature range of 15°C to 70°C for standard models and up to 120°C for hot water versions. The environmental temperature should not exceed 40°C, and it can function at altitudes up to 1000 meters.
Motor Specifications
The motor is a fully enclosed, air-cooled 2-pole standard motor with an IP55 protection rating and an F insulation class. Standard voltage options include 1-phase (220-230/240V) and 3-phase configurations (200-220/346-380V, 220-240/380-415V, 380-415V), making it compatible with various electrical systems around the world.
Typical Applications
This pump is widely used in water supply systems for filtration, distribution, and pressurization in high-rise buildings. In industrial settings, it supports process water systems, cleaning systems, high-pressure flushing, and fire control. It also plays a key role in liquid transportation for cooling systems, boiler feedwater, condensation systems, and chemical handling. Additionally, it is commonly applied in water treatment processes such as ultrafiltration, reverse osmosis, distillation, and separation. For agricultural use, it is suitable for irrigation systems, including sprinklers and drip irrigation setups.
This product is engineered for durability, efficiency, and ease of maintenance, making it a preferred choice for a wide range of commercial and industrial applications.
Introduction of GENT water to water heat pump
GENT water to water heat pump is a heat pump unit that uses natural water, such as surface runoff, groundwater, treaded sewage and other water sources as the cooling and heating sources, and realizes the functions of heating or cooling through heat transfer. This heat pump unit uses an efficient renewable energy utilization technology and are widely used in areas such as building heating, Air Conditioning and hot water supply.
Classification of unit
1.According to the different outlet water temperature of the water to water geothermal system in the heating working mode, GENT water to water ground source heat pump can be divided into ordinary Water Source Heat Pump and high temperature water source heat pump. Among them, the heating outlet water temperature of the ordinary water source heat pump is 35~55℃, and that of the high temperature water source heat pump is 55~85℃. In addition, although the two kinds of water source heat pump system have different heating water outlet temperatures, they have the same cooling water outlet temperature, both of which are 7~25℃. Users can choose the appropriate unit according to your actual needs.
2.Depending on the water source used by the unit, water source heat pump can be divided into many types, such as surface runoff water source heat pump, groundwater source heat pump, sewage source heat pump, and brine water heat pump that using seawater as the water source, etc. Users can choose the appropriate wshp unit according to the water source available to you.
Trane Water Source Heat Pump,Water Source Heat Pump System,Brine Water Heat Pump,Water To Water Ground Source Heat Pump,Water To Water Geothermal System
GUANGZHOU GENT NEW ENERGY TECHNOLOGY CO., LTD , https://www.gentgz.com